Tube oil skimmers
Operating Principle
The tube oil skimmer works according to the oleophilic collector tube. Oil sticks to a continuous loop-oil collector tube, which is made of flexible, special composite plastic that is resistant to high temperature and repels water. The collector tube flops so that it breaks through crusted oil or grease and makes these contaminants adhere to the outer surface. The oil-covered oil collector tube is constantly being pulled through nitrile or ceramic scrapers. Oil has been scraped off flows into the oil collection reservoir below the oil skimmer. After returning to the liquid surface, the clean oil collector tube collects more oil. By constant circulation of the oil collector tube, the liquid surface is kept in motion, and the oil floats toward the oil collector tube. Thus, it is removed from the entire surface of the basin.
Key Features
lCompact design fits almost any tank or pit
lDo not suffer level floating influence
lMultiple installation modes
lSimple and effective drive design
lFrom the influence of floater
lLong service life
lTube length according to your need
lOperating temperature -40℃—90℃
lLiquid PH value 0-14
Specifications
Type | Removal of light oils | Removal of medium oils | Removal of heavy oils | Motor (KW) | Weight (KG) | Size(mm) L*W*H |
JLOS-T8 | 15L/H | 34L/H | 151L/H | 0.04 | 8 | 305*203*229 |
JLOS-T15 | 36L/H | 92L/H | 216L/H | 0.2 | 16 | 650*175*260 |
JLOS-T20 | 53L/H | 129L/H | 303L/H | 0.2 | 23 | 650*258*480 |
JLOS-T25 | 76L/H | 189L/H | 454L/H | 0.2 | 30 | 914*508*305 |
Tube sizing chart
Skimmer height above high water level(cm) | Length of tube(cm) |
JLOS-T8 | JLOS-T15 | JLOS-T8 | JLOS-T15 |
JLOS-T20 | JLOS-T20 |
JLOS-T25 | JLOS-T25 |
30 | 90 | 210 | 490 |
60 | 150 | 275 | 730 |
90 | 240 | 335 | 790 |
120 | 300 | 395 | 920 |
150 | 365 | 460 | 1100 |
180 | 430 | 520 | 1220 |
240 | 490 | 640 | 1340 |
275 | 550 | 700 | 1466 |
300 | 610 | 760 | 1590 |
Above 300 | Above 610 | height×2+180 | height×2+500 |
Typical installation
Frame mount